|
Sniper-WB "Wide Body" Split Vision Rework System SMD-7007 |
| Print |
|
E-mail
|
|
Overview
The Sniper-WB is a higher powered machine designed to handle large PCB's with components requiring special attention. Large PCB's and larger SMT components require careful under board heating, covering a wide area to avoid warping. The Sniper-WB includes a 3600 Watt convection Hot Air Panel Heater and a total of 4800 Watts including reflow.
|
|
Sniper-WB
The Sniper-WB will rework PCB's as small as 2" x 2" and as large as 20" x 24" (508 x 610mm) {larger on special request}. Its powerful under board heater stabilizes the entire PCB and gently retards the warping of large PCB surface areas. This is achieved by a 3600 Watt high energy convection Panel Heater and a 1200 Watt Reflow Heater, total energy is 4800 Watts.
|
enlarge photo (Picture 1) (Picture 2) (Picture 3)
|
|
XY Table
In addition to the importance of high energy and greater bottom coverage, the Sniper-WB includes a XY Table with ledge support rails for the PCB. Steel support rods are used to prevent board sag and warping. The standard Board Holder supplied is 20" x 24" (508 x 610mm).
Programming and Operation
The Sniper-WB includes a sixteen (16) profile, sixteen (16) segmented controller, which is easily programmed using an integral key pad. Alternatively the system can be controlled via an RS232 connection with an external computer, using profiling software with infinite profile storage.
Axis Adjustment
Micrometer XYZ adjustment is provided on the Board Holder with a motorized Theta axis switch control. Theta in this manner is always "true" and referenced to the component not the PCB.
|
|
Sniper Wide Body Specifications:
Part # Description
7000-7007 Sniper-WB 220V 50/60Hz (220V Model only)
- Power
220V 50/60 Hz 4800 Watts
- Current
18 Amps, Operational 25 Amps
- Dimension
21.75" x 29.12" (552 x 740 mm)
- Board Holder Standard
20" x 24" (508 x 610 mm)
- Reflow Nozzles included
Six Nozzles of Choice with 12 months free exchange
- Preheat Nozzles included
- Temperature
Select Celsius or Fahrenheit
- Reflow Air Velocity
Internal Motor < 12.7 CFM
- Component Pick Up
Venturi Generator Reflow & Imaging
- Factory Air
80 PSI Dry Regulated
- Reflow Controller
PID Fuzzy Logic 16 Profiles
- Bottom Controller
PID Fuzzy Logic 4 Profiles
- Board Alignment
XY Table with Z axis
- Theta
Motorized
- Maximum Board Size
16" x 20"(406 x 508 mm)
- Air Flow
Up to 1 SCFM
- Weight
165 lb (75 kg)
- Operational Software
On Board Computer and Specview Graphic Display
- Optional Nitrogen System
APE also offers video narrated trials to help in the evaluation process, our lab technicians will perform your job and return the completed work with the video.
|
|
|
 Profile Control
The Sniper-WB stores up to sixteen (16) multi segment (Ramp & Soak) profiles on the machine or any number of profiles by using Windows-based software. Programs can be created and entered directly on the Reflow Controller keypad or created using Graphical Display software (included).
Data Logging events is provided in PDF format. The rework cycle is automatically controlled and shut off after completion. Graphical Display Window (GDW) The computer software provided operates in a Windows-based environment. Profile Pattern Recipes are easily created, stored, recalled, and edited using a Graphical Display Window (GDW).
|
|
Rework Equipment 
Shop Online