Automated Production Equipment (A.P.E.) - Chip-Max RoHS Rdy. Chipmaster

Automated Production Equipment ( A.P.E. )

You are here: Welcome to A.P.E.

Rework Equipment

SMT/BGA Rework

Chip-Max RoHS Rdy. Chipmaster

Login Form

Shop Online

Chip-Max RoHS Rdy. Chipmaster

| Print |

E-mail

The Chip-Max RoHS Rdy. Chipmaster is the ultimate in Lead Free Rework. With 2400 watts raw power, combined with ultra precise temperature control, the new RoHS Rdy. Chip-Max is the unstoppable unit for the small shop. The RoHS Rdy. Chip-Max will reflow Copper core, multilayer boards within 2 min, while insuring no components are burnt due to the unit's precision temperature control. Plastic sockets, edge connectors, RF Shields, BGA's, any component placed on a PCB during manufacturing can be reflowed with the new RoHS Rdy. Chip-Max. The Chip-Max can store and run 4 RAMP/SOAK profiles in Ramp Mode. There are a total of 3 different modes of operation.

All of the above with the added bonus of an extremely small foot print on the bench. What more could a tech want; an unbelievable price? You got it!

Chip-Max RoHS Rdy.Chipmaster

Overview

An affordable, totally integrated system for SMT rework and repair, the Chip-Max RoHS Rdy. Chipmaster is an excellent choice in replacing older "Contact" rework tools with the latest Low Temperature Hot Air technology for reworking SMT components without damage, at a very attractive price.

Low Temperature Operation

Accurate closed-loop temperature monitoring of a patented High Power heater, reduces rework temperature below 432°F (222°C) and possibly below 400°F (204°C).

Automatic Lift Off

An automatic vacuum pick-up assembly lifts the part from the board once eutectic temperature has been reached and continues to hold the part during the systems cooling cycle.

Nozzle Selection

An appropriate size nozzle is easily installed and the correct temperature is selected. The workpiece is mounted in the board holder and the nozzle placed over the component allowing a gap of 1/8" (3 mm) above the body of the component.

Automatic Vacuum Pick-up

The vacuum switch is turned on and the vacuum pick-up assembly is contacted to the top of the component body. The foot pedal is activated and when the component passes the eutectic temperature of 361°F (183°C), the component automatically lifts from the circuit board.

Part Number: 8300-33-RoHS-Rdy

Specifications:

Power 2400 Watts total, Reflow Head (1200watts), Integrated Localized Pre-Heat System (1200watts)
Current 10.90 Amp @ 110V, 5.45 Amps @220V
Dimension 14" x 8" x 12" (203 x 180 x 305 mm)
Board Holder Standard 8" x 8" (203 x 203 mm)
Nozzles included: (User may select alternatives)
8100-0000-44 0.80" x 0.80" (20.3 x 20.3 mm)
8100-1424 0.71" x 0.40" (18.0 x 10.2 mm)
8100-1075 1.00" x 0.75" (25.4 x 19.0 mm)
Temperature Celsius or Fahrenheit
Air Velocity <12.7 CFM
Vacuum Internal Pump
Air Source Internal Blower

Click Here to Purchase!

8300-33-RoHS-Rdy RoHS Rdy. Chip-Max 110V

8300-34-RoHS-Rdy RoHS Rdy. Chip-Max 220V

Cool Operation

Once the system is switched on, the Controller carries out a "Self Test" and the internal Blower Motor engages to provide a constant stream of high volume, low velocity cool air, which will not disturb or solder ball, within the rework area.

Board Holder

A standard 8" x 8" (203 x 203 mm) Board Holder is included for most board sizes, adjustable in all axis. A board release mechanism allows each board to snap into place and be quickly released when required. In addition an, on-demand, Z-axis clearance piston avoids profile obstructions, when locating to, or moving from the nozzle.

Joomla! is Free Software released under the GNU/GPL License.

Most Read